Percentage to CGPA Calculator

Turn a percentage into the CGPA it matches. The calculator runs the common CGPA to percentage formulas backwards, shows all five side by side, and tells you when your percentage is higher than a formula can reach.

India Reviewed November 2026By Manikant 3 min read

Your CGPA
—
Conversion chart for this formula
Private. Calculated in your browser.

How to use it

Animated walkthrough of the Percentage to CGPA Calculator
Quick walkthrough
  1. Enter your percentage.
  2. Pick the CGPA to percentage formula that applies to you. The calculator reverses it.
  3. Read the CGPA, and compare the other formulas.
  4. If the formula can’t reach your percentage, the calculator caps the CGPA at the maximum and tells you.

In short

  • Percentage to CGPA is the same formula run in reverse. If a university turns CGPA into a percentage by × 9.5, the reverse is ÷ 9.5.
  • 75% is a CGPA of 7.89 by ÷ 9.5, 7.5 by ÷ 10, 8.25 by the 0.75 rule, 8 by the 0.5 rule and 9.01 by the Mumbai University engineering formula.
  • Pick the formula the institution reading your form uses, not the one that gives the highest CGPA.
  • At high percentages some formulas run past 10. The Mumbai formula passes 10 at 82%. The calculator caps the result at 10 and says so.

How to convert percentage to CGPA

Enter your percentage, choose the formula your university or the institution you are applying to uses, and the CGPA appears at once. Underneath, the same percentage is run through all five common formulas, so you can see how much the answer depends on the rule.

Pick the formula in its usual CGPA to percentage form. The calculator solves it backwards for you. If your university gives its own rule, choose “My university’s own formula” and type the multiplier and the number you add.

Reversing each formula

Every CGPA to percentage rule has an inverse. Solve the rule for CGPA and you have the conversion going the other way.

CGPA to percentage formulaPercentage to CGPAExample: 75%
CGPA × 9.5percentage ÷ 9.57.89
CGPA × 10percentage ÷ 107.5
(CGPA − 0.75) × 10percentage ÷ 10 + 0.758.25
(CGPA − 0.5) × 10percentage ÷ 10 + 0.58
7.1 × CGPA + 11(percentage − 11) ÷ 7.19.01

The spread is wide. The same 75% lands anywhere from 7.5 to 9.01, a difference of 1.51 CGPA points. In a shortlist that filters on CGPA, that is the difference between clearing a cutoff comfortably and missing it.

Percentage to CGPA chart

Values from 100% down to 40%. An asterisk marks a result that the formula pushes past 10; the calculator caps those at 10.

PercentageCGPA × 9.5CGPA × 10(CGPA − 0.75) × 10(CGPA − 0.5) × 107.1 × CGPA + 11
100%10*1010*10*10*
95%109.510*1010*
90%9.4799.759.510*
85%8.958.59.25910*
80%8.4288.758.59.72
75%7.897.58.2589.01
70%7.3777.757.58.31
65%6.846.57.2577.61
60%6.3266.756.56.9
55%5.795.56.2566.2
50%5.2655.755.55.49
45%4.744.55.2554.79
40%4.2144.754.54.08

Which formula should you use?

  1. Your university’s rule. If your university states how it converts between CGPA and percentage, use that rule, and quote it if the form has a remarks box.
  2. The rule of whoever reads the form. Some colleges and employers say how they convert. Use theirs.
  3. A stated default. If neither exists, use ÷ 9.5 and say so, for example “75% (7.89 CGPA using percentage ÷ 9.5)”.

Choosing the formula that gives the highest CGPA can backfire. Applications are checked against documents, and a CGPA that doesn’t match your university’s conversion draws questions.

School board percentages and CBSE CGPA

For CBSE Class 10, the usual reverse of × 9.5 is ÷ 9.5. A percentage of 95% matches a CGPA of 10, 76% matches 8.0, and 60% matches 6.32. State boards use their own grading, so check yours before you assume the same rule.

What if your percentage is too high for the formula?

A formula can output more than 10 when your percentage is above its ceiling. Under the Mumbai University engineering formula, for instance, 85% works out to a CGPA of 10.42. A CGPA can’t exceed 10, so the calculator shows 10 and adds a note. If that happens to you, the formula probably isn’t the right one for your course. Check the circular for your faculty and year.

What this page does not do

It converts to a CGPA out of 10, 7, 5 or 4 using the formulas above, and nothing else. It does not produce a US-style 4.0 GPA. Evaluation services and universities abroad use their own scales and methods, and the result can differ from a simple proportion. If you need a 4.0 GPA, ask the destination university which service or table it accepts.

For the opposite direction, the CGPA to percentage calculator shows the same five formulas going forward, and the SGPA calculator helps you build a CGPA from your semester results.

Questions people ask

How do I convert 75 percent to CGPA?
Divide by 9.5 for 7.89, or by 10 for 7.5. The 0.75 rule gives 8.25, the 0.5 rule gives 8, and the Mumbai University engineering formula gives 9.01. Use the rule your university or the receiving institution follows.
What is 60 percent in CGPA?
By ÷ 9.5 it is 6.32. By ÷ 10 it is 6. The 0.75 rule gives 6.75, the 0.5 rule gives 6.5, and the Mumbai University engineering formula gives 6.9.
Is percentage to CGPA the same formula as CGPA to percentage?
It is the same formula solved the other way. If percentage = CGPA × 9.5, then CGPA = percentage ÷ 9.5.
Why do different websites give different CGPA for the same percentage?
They use different formulas, and universities themselves don’t agree on one. That is why this calculator shows five side by side and lets you enter your own.
Can a CGPA be more than 10?
No. If a formula gives a number above 10 the calculator shows 10 and tells you the formula has run out of range.

Sources and methodology

Last reviewed November 2026 by Manikant. Spotted something out of date? Tell us.